FORD OEM Software with RLink Connection Instructions
Note: After binding and activating the device and downloading the driver, you can use the RLink device to perform vehicle diagnostics without opening the RLink Platform later.
2. Click the settings icon. Then click About to check whether there is an update for the RLink Platform. If yes, click Update.
3. Click Driver Management > Driver Download. (Download the corresponding driver according to the OEM software. Do not download drivers that are not related to the OEM software.)
4. Click FORD and click Download to download the driver.
6. When using RLink devices, select RLink as the diagnostic interface on the OEM software. If you are connecting to the original VCI or third-party VCI, open the OEM software and select the original VCI or third-party VCI as the diagnostic interface. This driver will not have any impact.
7. Double click the icon to open the FDRS.
8. Click the icon on the lower right corner. Click Other Device and choose RLink. Then click OK to continue.
9. Log in to the FDRS account.
10. Double click the FJDS to start diagnostics.
12. Follow the orders in the figure below to select the device.
13. When the connection is successful, a successful connection message will be displayed.
14. Select vehicle for diagnostics after successful connection.
15. The system will detect the vehicle automatically.
Related Articles
FORD OEM Software with RLink J2534 Connection Instructions
Tips：You need to install the Ford OEM software before use. If it's not installed yet, you can download and install it from the official Ford website. https://www.fordserviceinfo.com/ 1. Open the RLink Platform.Clicking “Login to the Account” will ...FORD OEM Software with RLink X3 Connection Instructions
Updated on July 28, 2025 Tips：You need to install the Ford OEM software before use. If it's not installed yet, you can download and install it from the official Ford website. https://www.fordserviceinfo.com/ 1. Open the RLink Platform.Clicking “Login ...FORD OEM Software with RLink X7 Connection Instructions
Tips：You need to install the FORD OEM software before use. If it's not installed yet, you can download and install it from the official FORD website. https://www.fordserviceinfo.com/ 1. Open the RLink Platform.Clicking “Login to the Account” will ...FORD OEM Software with RLink Lite Connection Instructions
Tips：You need to install the FORD OEM software before use. If it's not installed yet, you can download and install it from the official FORD website. https://www.fordserviceinfo.com/ 1. Open the RLink Platform.Clicking “Login to the Account” will ...FORD OEM Diagnostic Software Installation and Usage Guide
Updated on August 8th, 2025 Thank you for purchasing the TOPDON RLink X3. This guide will assist you in performing diagnostics with the device. Please read all instructions carefully before use. Alternatively, you can also visit the website to watch ...