FORscan Software with RLink X3 Lite Connection Instructions

Tips：You need to install the forscan software before use. If it's not installed yet, You can download and install it from the official FORscan website.

1.Open the RLink Platform.Clicking “Login to the Account” will automatically

redirect you to the login page.Log in to the account bound to the RLink X3 Lite device.

Note: After binding and activating the device and downloading the driver, you can use the RLink X3 Lite device to perform vehicle diagnostics without opening the RLink Platform later.

2.Click the settings icon. Then click About to check whether there is an update for the RLink Platform. If yes, click Update.

3.Click Driver > Driver Download. Click FORD and click Download to download the driver.

Note: Download the corresponding driver according to the OEM software. Do not download drivers that are not related to the OEM software.

4.Click Driver > Driver Info. Then click FORD to configure the driver mode.

5.When using RLink X3 Lite devices, select RLink as the diagnostic interface on the OEM software. If you are connecting to the original VCI or third-party VCI, open the OEM software and select the original VCI or third-party VCI as the diagnostic interface. This driver will not have any impact.

6.Double-click to open the FORscan software.

7.Click the Settings button once the software opens.

8.Click Connection.

9.Select the J2534 standard mode from the Connection type options, then choose RLink mode under J2534 Adapter, and click the vehicle icon to return to the diagnostic page.

10.Click the connection icon in the lower left corner. Click OK on the pop-up prompt to automatically enter diagnostic mode.

11.Click YES after the vehicle is identified to start vehicle diagnostics.

12.Once vehicle ECU identification is completed, you can perform operations such as vehicle coding.

If you encounter any problems, you can send an email to support@topdon.com.