Tips：You need to install the Chrysler OEM software before use. If it's not installed yet, you can download and install it from the official Chrysler website.

1.Open the RLink Platform.Clicking “Login ” will automatically 

redirect you to the login page.Log in to the account bound to the RLink X3 Lite device.

Note: After binding and activating the device and downloading the driver, you can use the RLink X3 Lite device to perform vehicle diagnostics without opening the RLink Platform later.

3.Click Driver > Driver Download. Click Chrysler and click Download to download the driver.

Note:Download the corresponding driver according to the OEM software. Do not download drivers that are not related to the OEM software.

4.Click Driver > Driver Info. Then click Chrysler to configure the driver mode.

5.When using RLink X3 Lite devices, select RLink as the diagnostic interface on the OEM software. If you are connecting to the original VCI or third-party VCI, open the OEM software and select the original VCI or third-party VCI as the diagnostic interface. This driver will not have any impact. 

6.Double click the icon to open the wiTECH 2.0. 

7.Before using Witech2.0, the software will check for updates. Once updated to the latest version, you can log in and use it normally.

Note: When updating Witech2.0, the bound account and network IP must be from the same country or region. Otherwise, the update will fail.

8.Click Connect > Device, then click Non Verified J2534 Devic and choose TOPDON – RLink or AA-RLink.

9.Log in to the wiTECH2 account registered on the CHRYSLER official website. Choose wiTECH2 AM PROD to start vehicle diagnostics and vehicle faults reading.

 If you encounter any problems, you can send an email to support@topdon.com.